And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.989
And
I configure APT to prefer an old version of cowsay
0.015
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.434
And
I accept adding "cowsay" to Additional Software
4.843
And
Additional Software is correctly configured for package "cowsay"
0.645
And
I shutdown Tails and wait for the computer to power off
4.036
And
I start Tails from USB drive "__internal" with network unplugged
36.849
And
I enable persistence
7.230
And
I configure APT to prefer an old version of cowsay
0.009
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
9.295
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.322
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
I prepare the Additional Software upgrade process to fail
0.044
And
the network is plugged
0.013
And
available upgrades have been checked
1.147
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.520
And
I can open the Additional Software configuration window from the notification
2.603
And
I shutdown Tails and wait for the computer to power off
17.436
And
I start Tails from USB drive "__internal" with network unplugged
37.063
And
I enable persistence
6.643
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
10.244
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.235
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.053
Then
the Additional Software upgrade service has started
0.066
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062