And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.637
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.565
And
I accept adding "cowsay" to Additional Software
4.810
And
Additional Software is correctly configured for package "cowsay"
0.677
And
I shutdown Tails and wait for the computer to power off
8.149
And
I start Tails from USB drive "__internal" with network unplugged
37.421
And
I enable persistence
6.897
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.068
And
I log in to a new session
9.736
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.232
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.015
And
available upgrades have been checked
1.118
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.600
And
I can open the Additional Software configuration window from the notification
2.634
And
I shutdown Tails and wait for the computer to power off
8.349
And
I start Tails from USB drive "__internal" with network unplugged
37.499
And
I enable persistence
6.502
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
11.755
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.192
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.022
Then
the Additional Software upgrade service has started
0.063
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.071