And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:37.608
And
I configure APT to prefer an old version of cowsay
0.023
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.018
And
I accept adding "cowsay" to Additional Software
5.336
And
Additional Software is correctly configured for package "cowsay"
0.769
And
I shutdown Tails and wait for the computer to power off
7.669
And
I start Tails from USB drive "__internal" with network unplugged
44.529
And
I enable persistence
7.575
And
I configure APT to prefer an old version of cowsay
0.025
And
I disable the tails-virt-notify-user.service user unit
0.070
And
I log in to a new session
12.074
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.285
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
I prepare the Additional Software upgrade process to fail
0.069
And
the network is plugged
0.067
And
available upgrades have been checked
1.135
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.899
And
I can open the Additional Software configuration window from the notification
2.974
And
I shutdown Tails and wait for the computer to power off
22.720
And
I start Tails from USB drive "__internal" with network unplugged
44.199
And
I enable persistence
12.736
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
12.734
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.693
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
the network is plugged
0.058
Then
the Additional Software upgrade service has started
0.065
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.070