And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.335
And
I configure APT to prefer an old version of cowsay
0.013
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.836
And
I accept adding "cowsay" to Additional Software
4.877
And
Additional Software is correctly configured for package "cowsay"
0.713
And
I shutdown Tails and wait for the computer to power off
8.055
And
I start Tails from USB drive "__internal" with network unplugged
37.470
And
I enable persistence
6.748
And
I configure APT to prefer an old version of cowsay
0.014
And
I disable the tails-virt-notify-user.service user unit
0.064
And
I log in to a new session
10.794
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.545
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.064
And
the network is plugged
0.020
And
available upgrades have been checked
1.091
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.479
And
I can open the Additional Software configuration window from the notification
2.536
And
I shutdown Tails and wait for the computer to power off
17.633
And
I start Tails from USB drive "__internal" with network unplugged
38.041
And
I enable persistence
5.838
And
I configure APT to prefer an old version of cowsay
0.016
And
I log in to a new session
11.415
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.210
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.057
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.066