And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.471
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.383
And
I accept adding "cowsay" to Additional Software
3.587
And
Additional Software is correctly configured for package "cowsay"
0.569
And
I shutdown Tails and wait for the computer to power off
8.066
And
I start Tails from USB drive "__internal" with network unplugged
36.326
And
I enable persistence
6.631
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
8.602
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.214
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.036
And
the network is plugged
0.015
And
available upgrades have been checked
2.230
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.550
And
I can open the Additional Software configuration window from the notification
2.569
And
I shutdown Tails and wait for the computer to power off
22.161
And
I start Tails from USB drive "__internal" with network unplugged
34.669
And
I enable persistence
6.280
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
8.996
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.252
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.058
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.069