And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.413
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.248
And
I accept adding "cowsay" to Additional Software
3.806
And
Additional Software is correctly configured for package "cowsay"
0.589
And
I shutdown Tails and wait for the computer to power off
7.888
And
I start Tails from USB drive "__internal" with network unplugged
34.725
And
I enable persistence
5.455
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.057
And
I log in to a new session
9.522
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.228
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.015
And
available upgrades have been checked
0.035
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.534
And
I can open the Additional Software configuration window from the notification
2.587
And
I shutdown Tails and wait for the computer to power off
16.981
And
I start Tails from USB drive "__internal" with network unplugged
35.535
And
I enable persistence
6.498
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
10.239
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.177
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.060
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060