And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.978
And
I configure APT to prefer an old version of cowsay
0.014
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.346
And
I accept adding "cowsay" to Additional Software
3.734
And
Additional Software is correctly configured for package "cowsay"
0.650
And
I shutdown Tails and wait for the computer to power off
7.836
And
I start Tails from USB drive "__internal" with network unplugged
34.494
And
I enable persistence
5.509
And
I configure APT to prefer an old version of cowsay
0.018
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
9.322
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.467
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.034
And
I prepare the Additional Software upgrade process to fail
0.034
And
the network is plugged
0.015
And
available upgrades have been checked
2.168
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.421
And
I can open the Additional Software configuration window from the notification
2.501
And
I shutdown Tails and wait for the computer to power off
17.027
And
I start Tails from USB drive "__internal" with network unplugged
35.897
And
I enable persistence
5.290
And
I configure APT to prefer an old version of cowsay
0.015
And
I log in to a new session
9.630
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.216
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.066
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.045