And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.296
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.812
And
I accept adding "cowsay" to Additional Software
3.664
And
Additional Software is correctly configured for package "cowsay"
0.619
And
I shutdown Tails and wait for the computer to power off
8.033
And
I start Tails from USB drive "__internal" with network unplugged
36.194
And
I enable persistence
6.706
And
I configure APT to prefer an old version of cowsay
0.009
And
I disable the tails-virt-notify-user.service user unit
0.070
And
I log in to a new session
9.462
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.228
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.082
And
I prepare the Additional Software upgrade process to fail
0.047
And
the network is plugged
0.018
And
available upgrades have been checked
1.115
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.499
And
I can open the Additional Software configuration window from the notification
2.534
And
I shutdown Tails and wait for the computer to power off
17.153
And
I start Tails from USB drive "__internal" with network unplugged
36.471
And
I enable persistence
6.092
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
9.907
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.232
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.032
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.073
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.068