And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:30.941
And
I configure APT to prefer an old version of cowsay
0.022
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.976
And
I accept adding "cowsay" to Additional Software
5.540
And
Additional Software is correctly configured for package "cowsay"
0.807
And
I shutdown Tails and wait for the computer to power off
7.580
And
I start Tails from USB drive "__internal" with network unplugged
45.386
And
I enable persistence
10.367
And
I configure APT to prefer an old version of cowsay
0.044
And
I disable the tails-virt-notify-user.service user unit
0.059
And
I log in to a new session
12.971
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.195
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.062
And
the network is plugged
0.054
And
available upgrades have been checked
0.055
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.277
And
I can open the Additional Software configuration window from the notification
2.726
And
I shutdown Tails and wait for the computer to power off
17.363
And
I start Tails from USB drive "__internal" with network unplugged
44.617
And
I enable persistence
9.475
And
I configure APT to prefer an old version of cowsay
0.023
And
I log in to a new session
12.114
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.691
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
the network is plugged
0.085
Then
the Additional Software upgrade service has started
0.065
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.082