And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.100
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.356
And
I accept adding "cowsay" to Additional Software
3.746
And
Additional Software is correctly configured for package "cowsay"
0.610
And
I shutdown Tails and wait for the computer to power off
8.003
And
I start Tails from USB drive "__internal" with network unplugged
36.637
And
I enable persistence
5.453
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.044
And
I log in to a new session
9.007
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.221
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.060
And
the network is plugged
0.021
And
available upgrades have been checked
1.109
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.433
And
I can open the Additional Software configuration window from the notification
2.569
And
I shutdown Tails and wait for the computer to power off
22.206
And
I start Tails from USB drive "__internal" with network unplugged
34.869
And
I enable persistence
5.434
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
9.207
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.232
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.044
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.050