And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:27.567
And
I configure APT to prefer an old version of cowsay
0.035
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.861
And
I accept adding "cowsay" to Additional Software
4.022
And
Additional Software is correctly configured for package "cowsay"
0.692
And
I shutdown Tails and wait for the computer to power off
3.176
And
I start Tails from USB drive "__internal" with network unplugged
41.509
And
I enable persistence
7.537
And
I configure APT to prefer an old version of cowsay
0.020
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
11.910
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.206
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.063
And
the network is plugged
0.061
And
available upgrades have been checked
0.047
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.986
And
I can open the Additional Software configuration window from the notification
2.785
And
I shutdown Tails and wait for the computer to power off
22.080
And
I start Tails from USB drive "__internal" with network unplugged
41.917
And
I enable persistence
7.434
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
10.761
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.265
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.063
And
the network is plugged
0.058
Then
the Additional Software upgrade service has started
0.066
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.072