And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:34.146
And
I configure APT to prefer an old version of cowsay
0.021
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.854
And
I accept adding "cowsay" to Additional Software
5.861
And
Additional Software is correctly configured for package "cowsay"
0.721
And
I shutdown Tails and wait for the computer to power off
3.185
And
I start Tails from USB drive "__internal" with network unplugged
43.108
And
I enable persistence
7.730
And
I configure APT to prefer an old version of cowsay
0.029
And
I disable the tails-virt-notify-user.service user unit
0.060
And
I log in to a new session
12.586
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.224
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.069
And
I prepare the Additional Software upgrade process to fail
0.062
And
the network is plugged
0.050
And
available upgrades have been checked
0.068
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.480
And
I can open the Additional Software configuration window from the notification
2.889
And
I shutdown Tails and wait for the computer to power off
18.825
And
I start Tails from USB drive "__internal" with network unplugged
44.688
And
I enable persistence
8.522
And
I configure APT to prefer an old version of cowsay
0.025
And
I log in to a new session
13.474
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.262
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.066
Then
the Additional Software upgrade service has started
0.060
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075