And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:27.383
And
I configure APT to prefer an old version of cowsay
0.019
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.048
And
I accept adding "cowsay" to Additional Software
5.489
And
Additional Software is correctly configured for package "cowsay"
0.727
And
I shutdown Tails and wait for the computer to power off
7.449
And
I start Tails from USB drive "__internal" with network unplugged
41.815
And
I enable persistence
8.252
And
I configure APT to prefer an old version of cowsay
0.019
And
I disable the tails-virt-notify-user.service user unit
0.063
And
I log in to a new session
11.498
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.213
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.058
And
the network is plugged
0.057
And
available upgrades have been checked
0.060
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.127
And
I can open the Additional Software configuration window from the notification
2.736
And
I shutdown Tails and wait for the computer to power off
17.868
And
I start Tails from USB drive "__internal" with network unplugged
41.815
And
I enable persistence
7.536
And
I configure APT to prefer an old version of cowsay
0.019
And
I log in to a new session
12.181
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.203
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.063
Then
the Additional Software upgrade service has started
0.065
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.067