And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:43.834
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.511
And
I accept adding "cowsay" to Additional Software
3.628
And
Additional Software is correctly configured for package "cowsay"
0.680
And
I shutdown Tails and wait for the computer to power off
4.133
And
I start Tails from USB drive "__internal" with network unplugged
34.632
And
I enable persistence
5.482
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.046
And
I log in to a new session
8.765
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.176
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
I prepare the Additional Software upgrade process to fail
0.038
And
the network is plugged
0.015
And
available upgrades have been checked
0.031
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.486
And
I can open the Additional Software configuration window from the notification
2.549
And
I shutdown Tails and wait for the computer to power off
22.200
And
I start Tails from USB drive "__internal" with network unplugged
35.603
And
I enable persistence
5.527
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
9.286
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.241
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.013
Then
the Additional Software upgrade service has started
0.049
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.060