And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.252
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.789
And
I accept adding "cowsay" to Additional Software
4.936
And
Additional Software is correctly configured for package "cowsay"
0.685
And
I shutdown Tails and wait for the computer to power off
4.032
And
I start Tails from USB drive "__internal" with network unplugged
37.556
And
I enable persistence
6.802
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
11.082
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.202
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
I prepare the Additional Software upgrade process to fail
0.044
And
the network is plugged
0.015
And
available upgrades have been checked
2.205
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.635
And
I can open the Additional Software configuration window from the notification
2.550
And
I shutdown Tails and wait for the computer to power off
22.679
And
I start Tails from USB drive "__internal" with network unplugged
36.937
And
I enable persistence
6.347
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
9.776
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.195
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.056
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062