And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.852
And
I configure APT to prefer an old version of cowsay
0.014
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.728
And
I accept adding "cowsay" to Additional Software
5.102
And
Additional Software is correctly configured for package "cowsay"
0.823
And
I shutdown Tails and wait for the computer to power off
8.327
And
I start Tails from USB drive "__internal" with network unplugged
39.763
And
I enable persistence
6.884
And
I configure APT to prefer an old version of cowsay
0.053
And
I disable the tails-virt-notify-user.service user unit
0.072
And
I log in to a new session
10.736
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.236
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.060
And
the network is plugged
0.015
And
available upgrades have been checked
2.209
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.121
And
I can open the Additional Software configuration window from the notification
2.675
And
I shutdown Tails and wait for the computer to power off
22.904
And
I start Tails from USB drive "__internal" with network unplugged
37.267
And
I enable persistence
6.557
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
10.230
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.184
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.058
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061