And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.238
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.755
And
I accept adding "cowsay" to Additional Software
3.730
And
Additional Software is correctly configured for package "cowsay"
0.637
And
I shutdown Tails and wait for the computer to power off
3.976
And
I start Tails from USB drive "__internal" with network unplugged
36.242
And
I enable persistence
5.571
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
10.714
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.230
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
I prepare the Additional Software upgrade process to fail
0.039
And
the network is plugged
0.014
And
available upgrades have been checked
1.160
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.523
And
I can open the Additional Software configuration window from the notification
2.542
And
I shutdown Tails and wait for the computer to power off
2.696
And
I start Tails from USB drive "__internal" with network unplugged
37.163
And
I enable persistence
5.270
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
10.386
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.194
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.059
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.061