And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.704
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.462
And
I accept adding "cowsay" to Additional Software
3.709
And
Additional Software is correctly configured for package "cowsay"
0.584
And
I shutdown Tails and wait for the computer to power off
7.769
And
I start Tails from USB drive "__internal" with network unplugged
34.929
And
I enable persistence
5.254
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.048
And
I log in to a new session
10.190
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.199
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
I prepare the Additional Software upgrade process to fail
0.039
And
the network is plugged
0.025
And
available upgrades have been checked
1.096
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.546
And
I can open the Additional Software configuration window from the notification
2.487
And
I shutdown Tails and wait for the computer to power off
22.163
And
I start Tails from USB drive "__internal" with network unplugged
35.466
And
I enable persistence
5.182
And
I configure APT to prefer an old version of cowsay
0.018
And
I log in to a new session
9.372
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.232
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.067
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.055