And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.404
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.375
And
I accept adding "cowsay" to Additional Software
3.617
And
Additional Software is correctly configured for package "cowsay"
0.775
And
I shutdown Tails and wait for the computer to power off
8.434
And
I start Tails from USB drive "__internal" with network unplugged
36.795
And
I enable persistence
6.475
And
I configure APT to prefer an old version of cowsay
0.009
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
10.321
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.241
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.015
And
available upgrades have been checked
0.079
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.128
And
I can open the Additional Software configuration window from the notification
2.600
And
I shutdown Tails and wait for the computer to power off
17.429
And
I start Tails from USB drive "__internal" with network unplugged
38.289
And
I enable persistence
6.782
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
9.365
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.531
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.049
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062