And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.212
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.566
And
I accept adding "cowsay" to Additional Software
5.298
And
Additional Software is correctly configured for package "cowsay"
0.688
And
I shutdown Tails and wait for the computer to power off
8.446
And
I start Tails from USB drive "__internal" with network unplugged
39.734
And
I enable persistence
7.343
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
10.492
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.205
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.042
And
available upgrades have been checked
2.241
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.604
And
I can open the Additional Software configuration window from the notification
2.830
And
I shutdown Tails and wait for the computer to power off
17.797
And
I start Tails from USB drive "__internal" with network unplugged
40.637
And
I enable persistence
9.130
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
12.746
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.556
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.037
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.067
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.078