And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.115
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.720
And
I accept adding "cowsay" to Additional Software
4.912
And
Additional Software is correctly configured for package "cowsay"
0.695
And
I shutdown Tails and wait for the computer to power off
8.193
And
I start Tails from USB drive "__internal" with network unplugged
37.259
And
I enable persistence
6.555
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.051
And
I log in to a new session
10.359
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.209
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.082
And
I prepare the Additional Software upgrade process to fail
0.051
And
the network is plugged
0.018
And
available upgrades have been checked
1.139
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.046
And
I can open the Additional Software configuration window from the notification
2.582
And
I shutdown Tails and wait for the computer to power off
17.575
And
I start Tails from USB drive "__internal" with network unplugged
37.236
And
I enable persistence
6.815
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
9.584
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.216
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.055
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.081
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.077