And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.668
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.259
And
I accept adding "cowsay" to Additional Software
3.680
And
Additional Software is correctly configured for package "cowsay"
0.589
And
I shutdown Tails and wait for the computer to power off
4.229
And
I start Tails from USB drive "__internal" with network unplugged
36.038
And
I enable persistence
6.359
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.048
And
I log in to a new session
9.382
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.356
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.043
And
the network is plugged
0.013
And
available upgrades have been checked
2.215
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.580
And
I can open the Additional Software configuration window from the notification
2.581
And
I shutdown Tails and wait for the computer to power off
17.023
And
I start Tails from USB drive "__internal" with network unplugged
35.280
And
I enable persistence
5.495
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
10.221
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.367
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.137
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.098