And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.983
And
I configure APT to prefer an old version of cowsay
0.016
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.741
And
I accept adding "cowsay" to Additional Software
3.804
And
Additional Software is correctly configured for package "cowsay"
0.683
And
I shutdown Tails and wait for the computer to power off
4.095
And
I start Tails from USB drive "__internal" with network unplugged
38.983
And
I enable persistence
6.602
And
I configure APT to prefer an old version of cowsay
0.009
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
10.369
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.367
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.035
And
the network is plugged
0.016
And
available upgrades have been checked
1.107
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.224
And
I can open the Additional Software configuration window from the notification
2.675
And
I shutdown Tails and wait for the computer to power off
22.625
And
I start Tails from USB drive "__internal" with network unplugged
37.765
And
I enable persistence
6.537
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
11.380
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.415
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.132
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.063