And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:37.436
And
I configure APT to prefer an old version of cowsay
0.032
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.069
And
I accept adding "cowsay" to Additional Software
5.482
And
Additional Software is correctly configured for package "cowsay"
0.762
And
I shutdown Tails and wait for the computer to power off
8.650
And
I start Tails from USB drive "__internal" with network unplugged
49.579
And
I enable persistence
9.016
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.073
And
I log in to a new session
13.149
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.484
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.064
And
the network is plugged
0.094
And
available upgrades have been checked
0.067
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.382
And
I can open the Additional Software configuration window from the notification
2.751
And
I shutdown Tails and wait for the computer to power off
18.446
And
I start Tails from USB drive "__internal" with network unplugged
46.087
And
I enable persistence
8.943
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
13.490
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.406
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.058
And
the network is plugged
0.057
Then
the Additional Software upgrade service has started
0.164
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.074