And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.726
And
I configure APT to prefer an old version of cowsay
0.014
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.230
And
I accept adding "cowsay" to Additional Software
3.722
And
Additional Software is correctly configured for package "cowsay"
0.641
And
I shutdown Tails and wait for the computer to power off
2.673
And
I start Tails from USB drive "__internal" with network unplugged
35.985
And
I enable persistence
6.295
And
I configure APT to prefer an old version of cowsay
0.017
And
I disable the tails-virt-notify-user.service user unit
0.066
And
I log in to a new session
9.544
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.323
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
I prepare the Additional Software upgrade process to fail
0.043
And
the network is plugged
0.014
And
available upgrades have been checked
2.153
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.519
And
I can open the Additional Software configuration window from the notification
2.528
And
I shutdown Tails and wait for the computer to power off
13.402
And
I start Tails from USB drive "__internal" with network unplugged
35.804
And
I enable persistence
5.561
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
8.917
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.312
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.023
Then
the Additional Software upgrade service has started
0.139
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.059