And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:16.710
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.076
And
I accept adding "cowsay" to Additional Software
4.844
And
Additional Software is correctly configured for package "cowsay"
0.614
And
I shutdown Tails and wait for the computer to power off
8.314
And
I start Tails from USB drive "__internal" with network unplugged
38.090
And
I enable persistence
7.235
And
I configure APT to prefer an old version of cowsay
0.022
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
9.304
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.378
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.049
And
the network is plugged
0.014
And
available upgrades have been checked
1.122
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.036
And
I can open the Additional Software configuration window from the notification
2.567
And
I shutdown Tails and wait for the computer to power off
17.313
And
I start Tails from USB drive "__internal" with network unplugged
36.512
And
I enable persistence
6.950
And
I configure APT to prefer an old version of cowsay
0.013
And
I log in to a new session
9.713
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.395
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.042
And
the network is plugged
0.029
Then
the Additional Software upgrade service has started
0.140
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.077