And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.615
And
I configure APT to prefer an old version of cowsay
0.014
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.929
And
I accept adding "cowsay" to Additional Software
3.761
And
Additional Software is correctly configured for package "cowsay"
0.609
And
I shutdown Tails and wait for the computer to power off
5.016
And
I start Tails from USB drive "__internal" with network unplugged
36.759
And
I enable persistence
6.966
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.050
And
I log in to a new session
10.119
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.343
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.063
And
the network is plugged
0.016
And
available upgrades have been checked
0.040
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.454
And
I can open the Additional Software configuration window from the notification
2.545
And
I shutdown Tails and wait for the computer to power off
23.195
And
I start Tails from USB drive "__internal" with network unplugged
36.843
And
I enable persistence
6.434
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
11.485
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.362
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.039
Then
the Additional Software upgrade service has started
0.193
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.058