And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:28.529
And
I configure APT to prefer an old version of cowsay
0.025
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.084
And
I accept adding "cowsay" to Additional Software
5.769
And
Additional Software is correctly configured for package "cowsay"
0.778
And
I shutdown Tails and wait for the computer to power off
7.561
And
I start Tails from USB drive "__internal" with network unplugged
41.956
And
I enable persistence
7.636
And
I configure APT to prefer an old version of cowsay
0.023
And
I disable the tails-virt-notify-user.service user unit
0.062
And
I log in to a new session
13.551
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.405
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
I prepare the Additional Software upgrade process to fail
0.064
And
the network is plugged
0.048
And
available upgrades have been checked
0.071
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.570
And
I can open the Additional Software configuration window from the notification
2.813
And
I shutdown Tails and wait for the computer to power off
22.448
And
I start Tails from USB drive "__internal" with network unplugged
42.191
And
I enable persistence
7.483
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
10.912
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.684
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
the network is plugged
0.050
Then
the Additional Software upgrade service has started
0.170
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.083