And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:26.973
And
I configure APT to prefer an old version of cowsay
0.023
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.108
And
I accept adding "cowsay" to Additional Software
5.461
And
Additional Software is correctly configured for package "cowsay"
0.623
And
I shutdown Tails and wait for the computer to power off
7.461
And
I start Tails from USB drive "__internal" with network unplugged
41.732
And
I enable persistence
7.851
And
I configure APT to prefer an old version of cowsay
0.023
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
10.576
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.367
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.069
And
the network is plugged
0.063
And
available upgrades have been checked
0.060
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.088
And
I can open the Additional Software configuration window from the notification
2.725
And
I shutdown Tails and wait for the computer to power off
17.899
And
I start Tails from USB drive "__internal" with network unplugged
41.775
And
I enable persistence
7.584
And
I configure APT to prefer an old version of cowsay
0.030
And
I log in to a new session
12.476
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.417
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.061
And
the network is plugged
0.049
Then
the Additional Software upgrade service has started
0.163
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.079