And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.350
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.587
And
I accept adding "cowsay" to Additional Software
3.732
And
Additional Software is correctly configured for package "cowsay"
0.699
And
I shutdown Tails and wait for the computer to power off
8.159
And
I start Tails from USB drive "__internal" with network unplugged
37.593
And
I enable persistence
5.677
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.061
And
I log in to a new session
10.278
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.759
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.050
And
the network is plugged
0.021
And
available upgrades have been checked
1.089
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.061
And
I can open the Additional Software configuration window from the notification
2.560
And
I shutdown Tails and wait for the computer to power off
17.903
And
I start Tails from USB drive "__internal" with network unplugged
38.105
And
I enable persistence
5.692
And
I configure APT to prefer an old version of cowsay
0.020
And
I log in to a new session
10.724
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.377
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.020
Then
the Additional Software upgrade service has started
0.371
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.077