And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:24.675
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.337
And
I accept adding "cowsay" to Additional Software
4.992
And
Additional Software is correctly configured for package "cowsay"
0.703
And
I shutdown Tails and wait for the computer to power off
8.380
And
I start Tails from USB drive "__internal" with network unplugged
42.373
And
I enable persistence
7.533
And
I configure APT to prefer an old version of cowsay
0.015
And
I disable the tails-virt-notify-user.service user unit
0.063
And
I log in to a new session
11.741
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.503
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.052
And
the network is plugged
0.024
And
available upgrades have been checked
1.141
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.556
And
I can open the Additional Software configuration window from the notification
2.565
And
I shutdown Tails and wait for the computer to power off
22.589
And
I start Tails from USB drive "__internal" with network unplugged
44.691
And
I enable persistence
8.900
And
I configure APT to prefer an old version of cowsay
0.018
And
I log in to a new session
11.112
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.461
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.056
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.164
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.089