And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.653
And
I configure APT to prefer an old version of cowsay
0.013
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.726
And
I accept adding "cowsay" to Additional Software
6.178
And
Additional Software is correctly configured for package "cowsay"
0.676
And
I shutdown Tails and wait for the computer to power off
4.190
And
I start Tails from USB drive "__internal" with network unplugged
40.512
And
I enable persistence
7.197
And
I configure APT to prefer an old version of cowsay
0.023
And
I disable the tails-virt-notify-user.service user unit
0.119
And
I log in to a new session
10.801
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.433
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.064
And
the network is plugged
0.016
And
available upgrades have been checked
1.106
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.647
And
I can open the Additional Software configuration window from the notification
2.723
And
I shutdown Tails and wait for the computer to power off
17.650
And
I start Tails from USB drive "__internal" with network unplugged
40.601
And
I enable persistence
7.677
And
I configure APT to prefer an old version of cowsay
0.014
And
I log in to a new session
12.676
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.448
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
the network is plugged
0.021
Then
the Additional Software upgrade service has started
0.145
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.068