And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.391
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.887
And
I accept adding "cowsay" to Additional Software
6.117
And
Additional Software is correctly configured for package "cowsay"
0.693
And
I shutdown Tails and wait for the computer to power off
8.257
And
I start Tails from USB drive "__internal" with network unplugged
40.366
And
I enable persistence
7.598
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.080
And
I log in to a new session
10.472
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.364
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.039
And
the network is plugged
0.030
And
available upgrades have been checked
0.040
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.474
And
I can open the Additional Software configuration window from the notification
2.610
And
I shutdown Tails and wait for the computer to power off
12.369
And
I start Tails from USB drive "__internal" with network unplugged
39.828
And
I enable persistence
6.128
And
I configure APT to prefer an old version of cowsay
0.016
And
I log in to a new session
12.837
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.323
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.033
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.171
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.071