And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:49.851
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.000
And
I accept adding "cowsay" to Additional Software
3.759
And
Additional Software is correctly configured for package "cowsay"
0.538
And
I shutdown Tails and wait for the computer to power off
7.914
And
I start Tails from USB drive "__internal" with network unplugged
36.318
And
I enable persistence
6.657
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.068
And
I log in to a new session
9.926
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.322
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.076
And
the network is plugged
0.018
And
available upgrades have been checked
2.137
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.965
And
I can open the Additional Software configuration window from the notification
2.589
And
I shutdown Tails and wait for the computer to power off
22.258
And
I start Tails from USB drive "__internal" with network unplugged
35.962
And
I enable persistence
5.716
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
9.329
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.363
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
the network is plugged
0.028
Then
the Additional Software upgrade service has started
0.163
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.055