And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:12.516
And
I configure APT to prefer an old version of cowsay
0.014
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.598
And
I accept adding "cowsay" to Additional Software
3.688
And
Additional Software is correctly configured for package "cowsay"
0.644
And
I shutdown Tails and wait for the computer to power off
7.874
And
I start Tails from USB drive "__internal" with network unplugged
36.247
And
I enable persistence
5.301
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
8.866
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.344
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.045
And
I prepare the Additional Software upgrade process to fail
0.044
And
the network is plugged
0.014
And
available upgrades have been checked
1.112
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.994
And
I can open the Additional Software configuration window from the notification
2.536
And
I shutdown Tails and wait for the computer to power off
18.634
And
I start Tails from USB drive "__internal" with network unplugged
35.582
And
I enable persistence
5.703
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
9.941
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.309
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
the network is plugged
0.016
Then
the Additional Software upgrade service has started
0.159
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.049