And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:31.908
And
I configure APT to prefer an old version of cowsay
0.021
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.449
And
I accept adding "cowsay" to Additional Software
5.629
And
Additional Software is correctly configured for package "cowsay"
0.802
And
I shutdown Tails and wait for the computer to power off
3.176
And
I start Tails from USB drive "__internal" with network unplugged
43.929
And
I enable persistence
8.158
And
I configure APT to prefer an old version of cowsay
0.023
And
I disable the tails-virt-notify-user.service user unit
0.081
And
I log in to a new session
11.994
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.341
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.058
And
the network is plugged
0.055
And
available upgrades have been checked
1.143
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.295
And
I can open the Additional Software configuration window from the notification
2.735
And
I shutdown Tails and wait for the computer to power off
18.259
And
I start Tails from USB drive "__internal" with network unplugged
45.621
And
I enable persistence
8.072
And
I configure APT to prefer an old version of cowsay
0.026
And
I log in to a new session
13.704
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.769
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
the network is plugged
0.058
Then
the Additional Software upgrade service has started
0.173
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.097