And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:43.888
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.722
And
I accept adding "cowsay" to Additional Software
3.746
And
Additional Software is correctly configured for package "cowsay"
0.657
And
I shutdown Tails and wait for the computer to power off
7.850
And
I start Tails from USB drive "__internal" with network unplugged
36.137
And
I enable persistence
5.421
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.054
And
I log in to a new session
9.637
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.338
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.035
And
I prepare the Additional Software upgrade process to fail
0.041
And
the network is plugged
0.018
And
available upgrades have been checked
2.138
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.504
And
I can open the Additional Software configuration window from the notification
2.567
And
I shutdown Tails and wait for the computer to power off
17.237
And
I start Tails from USB drive "__internal" with network unplugged
36.111
And
I enable persistence
5.226
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
10.296
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.648
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.050
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.128
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057