And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.294
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.453
And
I accept adding "cowsay" to Additional Software
3.765
And
Additional Software is correctly configured for package "cowsay"
0.595
And
I shutdown Tails and wait for the computer to power off
4.117
And
I start Tails from USB drive "__internal" with network unplugged
36.270
And
I enable persistence
5.506
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.048
And
I log in to a new session
9.268
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.662
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.044
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.018
And
available upgrades have been checked
1.107
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.022
And
I can open the Additional Software configuration window from the notification
2.536
And
I shutdown Tails and wait for the computer to power off
18.645
And
I start Tails from USB drive "__internal" with network unplugged
37.049
And
I enable persistence
5.428
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
10.856
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.294
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.158
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.066