And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:13.744
And
I configure APT to prefer an old version of cowsay
0.014
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.691
And
I accept adding "cowsay" to Additional Software
3.762
And
Additional Software is correctly configured for package "cowsay"
0.661
And
I shutdown Tails and wait for the computer to power off
7.837
And
I start Tails from USB drive "__internal" with network unplugged
36.054
And
I enable persistence
5.331
And
I configure APT to prefer an old version of cowsay
0.012
And
I disable the tails-virt-notify-user.service user unit
0.055
And
I log in to a new session
10.369
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.344
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.031
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.016
And
available upgrades have been checked
1.107
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.958
And
I can open the Additional Software configuration window from the notification
2.511
And
I shutdown Tails and wait for the computer to power off
17.027
And
I start Tails from USB drive "__internal" with network unplugged
35.201
And
I enable persistence
5.302
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
9.328
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.314
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.036
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.149
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.063