And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:29.002
And
I configure APT to prefer an old version of cowsay
0.024
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.524
And
I accept adding "cowsay" to Additional Software
5.794
And
Additional Software is correctly configured for package "cowsay"
0.761
And
I shutdown Tails and wait for the computer to power off
7.458
And
I start Tails from USB drive "__internal" with network unplugged
41.416
And
I enable persistence
8.142
And
I configure APT to prefer an old version of cowsay
0.026
And
I disable the tails-virt-notify-user.service user unit
0.063
And
I log in to a new session
12.952
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.818
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.047
And
I prepare the Additional Software upgrade process to fail
0.063
And
the network is plugged
0.069
And
available upgrades have been checked
0.068
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
3.198
And
I can open the Additional Software configuration window from the notification
2.825
And
I shutdown Tails and wait for the computer to power off
2:2.970
And
I start Tails from USB drive "__internal" with network unplugged
41.492
And
I enable persistence
7.814
And
I configure APT to prefer an old version of cowsay
0.021
And
I log in to a new session
11.041
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.335
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
the network is plugged
0.058
Then
the Additional Software upgrade service has started
0.144
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.073