And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.483
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.252
And
I accept adding "cowsay" to Additional Software
3.721
And
Additional Software is correctly configured for package "cowsay"
0.744
And
I shutdown Tails and wait for the computer to power off
4.193
And
I start Tails from USB drive "__internal" with network unplugged
37.692
And
I enable persistence
5.770
And
I configure APT to prefer an old version of cowsay
0.023
And
I disable the tails-virt-notify-user.service user unit
0.073
And
I log in to a new session
9.944
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.538
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.048
And
the network is plugged
0.017
And
available upgrades have been checked
1.132
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.079
And
I can open the Additional Software configuration window from the notification
2.582
And
I shutdown Tails and wait for the computer to power off
13.673
And
I start Tails from USB drive "__internal" with network unplugged
38.523
And
I enable persistence
6.834
And
I configure APT to prefer an old version of cowsay
0.022
And
I log in to a new session
10.470
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.802
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.057
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.131
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.053