And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:11.376
And
I configure APT to prefer an old version of cowsay
0.014
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.566
And
I accept adding "cowsay" to Additional Software
3.667
And
Additional Software is correctly configured for package "cowsay"
0.654
And
I shutdown Tails and wait for the computer to power off
7.812
And
I start Tails from USB drive "__internal" with network unplugged
34.881
And
I enable persistence
5.312
And
I configure APT to prefer an old version of cowsay
0.009
And
I disable the tails-virt-notify-user.service user unit
0.053
And
I log in to a new session
9.599
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.332
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.038
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.014
And
available upgrades have been checked
2.161
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.462
And
I can open the Additional Software configuration window from the notification
2.523
And
I shutdown Tails and wait for the computer to power off
12.928
And
I start Tails from USB drive "__internal" with network unplugged
35.910
And
I enable persistence
6.263
And
I configure APT to prefer an old version of cowsay
0.009
And
I log in to a new session
9.523
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.316
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.029
And
the network is plugged
0.018
Then
the Additional Software upgrade service has started
0.129
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.055