And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:43.953
And
I configure APT to prefer an old version of cowsay
0.009
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.374
And
I accept adding "cowsay" to Additional Software
3.613
And
Additional Software is correctly configured for package "cowsay"
0.566
And
I shutdown Tails and wait for the computer to power off
4.185
And
I start Tails from USB drive "__internal" with network unplugged
34.605
And
I enable persistence
5.550
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.058
And
I log in to a new session
9.678
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.361
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
I prepare the Additional Software upgrade process to fail
0.042
And
the network is plugged
0.017
And
available upgrades have been checked
1.099
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.500
And
I can open the Additional Software configuration window from the notification
2.573
And
I shutdown Tails and wait for the computer to power off
18.505
And
I start Tails from USB drive "__internal" with network unplugged
34.952
And
I enable persistence
5.312
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
9.069
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.371
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.046
And
the network is plugged
0.014
Then
the Additional Software upgrade service has started
0.193
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.062