And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:18.170
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.583
And
I accept adding "cowsay" to Additional Software
4.744
And
Additional Software is correctly configured for package "cowsay"
0.801
And
I shutdown Tails and wait for the computer to power off
4.142
And
I start Tails from USB drive "__internal" with network unplugged
37.559
And
I enable persistence
6.362
And
I configure APT to prefer an old version of cowsay
0.035
And
I disable the tails-virt-notify-user.service user unit
0.061
And
I log in to a new session
10.733
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.679
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.076
And
I prepare the Additional Software upgrade process to fail
0.039
And
the network is plugged
0.022
And
available upgrades have been checked
1.093
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
1.017
And
I can open the Additional Software configuration window from the notification
2.494
And
I shutdown Tails and wait for the computer to power off
17.463
And
I start Tails from USB drive "__internal" with network unplugged
37.601
And
I enable persistence
5.587
And
I configure APT to prefer an old version of cowsay
0.013
And
I log in to a new session
10.541
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.333
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.049
And
the network is plugged
0.031
Then
the Additional Software upgrade service has started
0.150
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.071