And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:21.196
And
I configure APT to prefer an old version of cowsay
0.019
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.465
And
I accept adding "cowsay" to Additional Software
4.907
And
Additional Software is correctly configured for package "cowsay"
0.680
And
I shutdown Tails and wait for the computer to power off
8.120
And
I start Tails from USB drive "__internal" with network unplugged
38.541
And
I enable persistence
6.701
And
I configure APT to prefer an old version of cowsay
0.010
And
I disable the tails-virt-notify-user.service user unit
0.063
And
I log in to a new session
10.582
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.586
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.054
And
I prepare the Additional Software upgrade process to fail
0.044
And
the network is plugged
0.026
And
available upgrades have been checked
1.084
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.513
And
I can open the Additional Software configuration window from the notification
2.642
And
I shutdown Tails and wait for the computer to power off
17.356
And
I start Tails from USB drive "__internal" with network unplugged
37.392
And
I enable persistence
5.746
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
10.673
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.362
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.048
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.109
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.055