And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:17.924
And
I configure APT to prefer an old version of cowsay
0.012
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.763
And
I accept adding "cowsay" to Additional Software
3.696
And
Additional Software is correctly configured for package "cowsay"
0.686
And
I shutdown Tails and wait for the computer to power off
7.113
And
I start Tails from USB drive "__internal" with network unplugged
36.892
And
I enable persistence
6.670
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.045
And
I log in to a new session
10.438
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.690
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.052
And
I prepare the Additional Software upgrade process to fail
0.063
And
the network is plugged
0.017
And
available upgrades have been checked
0.051
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.442
And
I can open the Additional Software configuration window from the notification
2.562
And
I shutdown Tails and wait for the computer to power off
17.485
And
I start Tails from USB drive "__internal" with network unplugged
37.091
And
I enable persistence
5.406
And
I configure APT to prefer an old version of cowsay
0.012
And
I log in to a new session
10.187
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.288
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.040
And
the network is plugged
0.015
Then
the Additional Software upgrade service has started
0.126
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.057