And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:20.678
And
I configure APT to prefer an old version of cowsay
0.010
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.861
And
I accept adding "cowsay" to Additional Software
5.050
And
Additional Software is correctly configured for package "cowsay"
0.846
And
I shutdown Tails and wait for the computer to power off
7.034
And
I start Tails from USB drive "__internal" with network unplugged
37.890
And
I enable persistence
6.684
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.052
And
I log in to a new session
10.398
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.322
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.043
And
I prepare the Additional Software upgrade process to fail
0.048
And
the network is plugged
0.014
And
available upgrades have been checked
2.158
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.595
And
I can open the Additional Software configuration window from the notification
2.549
And
I shutdown Tails and wait for the computer to power off
4.628
And
I start Tails from USB drive "__internal" with network unplugged
38.290
And
I enable persistence
7.250
And
I configure APT to prefer an old version of cowsay
0.011
And
I log in to a new session
9.892
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.428
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.072
And
the network is plugged
0.021
Then
the Additional Software upgrade service has started
0.113
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.056