And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:14.337
And
I configure APT to prefer an old version of cowsay
0.018
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.580
And
I accept adding "cowsay" to Additional Software
3.648
And
Additional Software is correctly configured for package "cowsay"
0.624
And
I shutdown Tails and wait for the computer to power off
7.958
And
I start Tails from USB drive "__internal" with network unplugged
35.858
And
I enable persistence
5.511
And
I configure APT to prefer an old version of cowsay
0.011
And
I disable the tails-virt-notify-user.service user unit
0.051
And
I log in to a new session
10.382
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.265
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.062
And
I prepare the Additional Software upgrade process to fail
0.046
And
the network is plugged
0.017
And
available upgrades have been checked
0.035
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
2.174
And
I can open the Additional Software configuration window from the notification
2.502
And
I shutdown Tails and wait for the computer to power off
17.219
And
I start Tails from USB drive "__internal" with network unplugged
36.436
And
I enable persistence
5.460
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
9.379
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.334
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.041
And
the network is plugged
0.017
Then
the Additional Software upgrade service has started
0.147
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.082