And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:28.338
And
I configure APT to prefer an old version of cowsay
0.020
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
9.518
And
I accept adding "cowsay" to Additional Software
5.422
And
Additional Software is correctly configured for package "cowsay"
0.783
And
I shutdown Tails and wait for the computer to power off
3.117
And
I start Tails from USB drive "__internal" with network unplugged
42.364
And
I enable persistence
8.745
And
I configure APT to prefer an old version of cowsay
0.027
And
I disable the tails-virt-notify-user.service user unit
0.080
And
I log in to a new session
12.354
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.325
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.066
And
I prepare the Additional Software upgrade process to fail
0.063
And
the network is plugged
0.060
And
available upgrades have been checked
0.078
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.667
And
I can open the Additional Software configuration window from the notification
2.680
And
I shutdown Tails and wait for the computer to power off
2:6.670
And
I start Tails from USB drive "__internal" with network unplugged
44.097
And
I enable persistence
8.783
And
I configure APT to prefer an old version of cowsay
0.023
And
I log in to a new session
12.133
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.384
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.051
And
the network is plugged
0.263
Then
the Additional Software upgrade service has started
0.134
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.075