And
I start Tails from USB drive "__internal" and I login with persistence enabled and an administration password
1:19.530
And
I configure APT to prefer an old version of cowsay
0.011
When
I install an old version "3.03+dfsg2-1" of the cowsay package using apt
8.455
And
I accept adding "cowsay" to Additional Software
3.660
And
Additional Software is correctly configured for package "cowsay"
0.778
And
I shutdown Tails and wait for the computer to power off
4.047
And
I start Tails from USB drive "__internal" with network unplugged
36.464
And
I enable persistence
6.608
And
I configure APT to prefer an old version of cowsay
0.013
And
I disable the tails-virt-notify-user.service user unit
0.042
And
I log in to a new session
9.920
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.360
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.039
And
I prepare the Additional Software upgrade process to fail
0.061
And
the network is plugged
0.016
And
available upgrades have been checked
2.214
And
I see the "The upgrade of your additional software failed" notification after at most 300 seconds
0.978
And
I can open the Additional Software configuration window from the notification
2.639
And
I shutdown Tails and wait for the computer to power off
17.406
And
I start Tails from USB drive "__internal" with network unplugged
35.941
And
I enable persistence
6.894
And
I configure APT to prefer an old version of cowsay
0.010
And
I log in to a new session
9.392
And
the installed version of package "cowsay" is "3.03+dfsg2-1" after Additional Software has been started
10.755
And
I revert the APT tweaks that made it prefer an old version of cowsay
0.060
And
the network is plugged
0.019
Then
the Additional Software upgrade service has started
0.126
And
the installed version of package "cowsay" is newer than "3.03+dfsg2-1"
0.065